1.6.2. A manual brake
Completely tightened manual brake obstructs to involuntary traffic of the car.
Tightening of a manual brake
The manual brake is tightened by lever movement upwards against the stop.
Removal from a manual brake
Pull the lever a little upwards and press simultaneously the clamp button (fig. 1.144
At the pressed button completely to lower the lever downwards.
At movement on rashness with the tightened manual brake buzzer sounding (a sound signal) is distributed and on the display there is an instruction: Handbremse angezogen (will tighten a manual brake).
The given prevention appears at movement more than 3 with with a speed more than 5 km/h. The prevention dies away right after removals of the car from a manual brake
At the tightened manual brake and the included ignition the control lamp of a manual brake burns.
Watch full removal of the car from a manual brake. Partially released manual brake can become the reason of an overheat of back brakes and by that negatively to affect on function of brake system.
After a car stop always tighten in the beginning against the stop a manual brake, and then include in addition transfer of a mechanical transmission, and in the presence of automatic transmission lay blocking Р.
Stop the car a brake pedal.
Tighten completely a manual brake.
Muffle the engine.
Include 1st transfer of a mechanical transmission, and in the presence of automatic transmission lay blocking Р.
In the closed car nobody should remain, first of all children since doors and windows from within do not open. Closed doors in emergency interfere with assistance rendering to people being in the car.