2.6.8. Removal and installation of a fuel stage (Rail)

After replacement of a fuel stage it is necessary to adjust again a potentiometer заслонки an inlet collector on the block of management of the engine.

THE NOTE The inlet collector should be removed.

Remove all hoses of an absorber with the activated coal.

Open шланговый a collar 1.

Unscrew both screws from a fuel stage.

Fig. 2.236. Shlangovoe connection

Disconnect шланговое connection 1 from an inlet collector and unscrew both screws (fig. 2.236).

Turn off both топливопровода 2 and 3.

Fig. 2.237. Connections топливопровода, заслонка an inlet collector and the engine

Cautiously lift draught of the engine заслонки an inlet collector 4 (fig. 2.237).

Unscrew the engine заслонки an inlet collector 5 (fig. 2.237).

Lift топливораспределительную a tube over fixing ledges of an inlet collector.

Remove the distributor of fuel from an inlet collector.

Installation is carried out in return sequence.

Establish an inlet collector.