Audi A4 with 2001- 2005 of release.
1. Operation and car maintenance service
2. The engine
3. Transmission
4. A running gear
4.1. Wheels and tyres
4.1.1. The general information on wheels and tyres
4.1.2. Specifications for re-equipment of disks and tyres
4.1.3. Indexes of speed of tyres
4.1.4. Marks on disks
4.1.5. Compound disks
4.1.6. Deterioration and ходимость tyres
4.1.7. Deterioration of high-speed tyres
4.1.8. Service of tyres
4.1.9. In regular intervals worn out tyres
4.1.10. Measurement of height of drawing of a protector
4.1.11. Unilateral deterioration
4.1.12. Diagonal non-uniform deterioration
4.1.13. Noise качения tyres
4.1.14. Balancing
4.1.15. Radial and lateral palpation of wheels and tyres
4.1.16. Check of radial and lateral palpation of a disk with the tyre by means of the indicator of hour type for tyres V.A.G 1435
4.1.17. Minimisation
4.1.18. Lateral withdrawal of the car
4.1.19. Elimination of lateral withdrawal
4.1.20. Damages of tyres
4.1.21. A design of the radial tyre
4.1.22. Loss of pressure of air in tyres
4.1.23. Damages of tyres because of errors at mounting (assembly damages)
4.1.24. Marks sidewallsы tyres
4.1.25. Shift of wheels
4.1.26. Instructions on replacement and installation of wheels
4.1.27. Change of tyres
4.1.28. Removal and installation of the case of the metal gate
4.2. The general data on a car running gear
4.3. Repair of a suspension bracket of forward wheels
4.4. A back suspension bracket
4.5. Tables
5. The steering mechanism
6. Brake system
7. An onboard electric equipment
8. A body
9. Electric equipment schemes



4.1.2. Specifications for re-equipment of disks and tyres

Resulted in tables of separate cars of a combination of disks and tyres, and also re-equipment concern exclusively original disks Audi.
The admission of wheels or their re-equipment on stereotyped disks are impossible by means of the applied permission to accessories.
Бескамерные radial tyres are authorised to be maintained only on disks with conic regiments with safe заплечником, for example round хамп.
At operation of the specified combinations of disks and tyres it is necessary to observe corresponding pressure in tyres. Pressure of air for summer tyres is specified on a sticker on an inside лючка mouths of a fuel tank or in the table on the concrete car.
The sufficient distance of wheels and tyres to elements of a wheel niche, a suspension bracket and brakes is guaranteed at observance defined in the permission to accessories of instructions at any service conditions.
In the absence of any additional information of a chain противоскольжения it is authorised to establish only on driving wheels. However, on cars with a full drive it is authorised to mount chains противоскольжения only on forward wheels, and on Touareg also on the back.
On a forward and back axis it is necessary to establish tyres and disks of the identical size. On cars with a full drive it is necessary to establish tyres of the identical manufacturer and a protector profile.

4.1.1. The general information on wheels and tyres

4.1.3. Indexes of speed of tyres