Audi A4 with 2001- 2005 of release.
1. Operation and car maintenance service
2. The engine
2.1. The general data
2.2. Predvaritlnye checks
2.3. A Mehanichsky part (petrol engines 2,0л)
2.4. Greasing system
2.5. Cooling system
2.6. Injection system
2.7. System of release of the fulfilled gases
2.8. A mechanical part (petrol engines 3,0; 3,2)
2.9. A mechanical part (petrol engines 4,2)
2.10. A mechanical part (diesel engines 2,0)
2.10.1. Engine number
2.10.2. Candles накаливания
2.10.3. Removal and installation semi wedge a belt
2.10.4. Removal and installation of a tension element semi wedge a belt
2.10.5. Removal and installation гасителя крутильных fluctuations
2.10.6. Removal and installation of an arm of additional units
2.10.7. Removal and installation of a gear belt
2.10.8. Updating of phases timing
2.10.9. Проворачивание crankshaftа to ВМТ
2.10.10. Sealing flanges and a two-mass flywheel / a flywheel
2.10.11. Removal and flywheel installation, cars with multitronic
2.10.12. Shatunno-piston group
2.10.13. Removal and installation of a cover of a head of the block of cylinders
2.10.14. Repair клапанного the mechanism
2.10.15. Removal and installation of cam-shafts
2.10.16. Removal and installation of roller levers
2.10.17. Replacement маслосъемных caps
2.10.18. Check of hydraulic pushers
2.11. Tables
3. Transmission
4. A running gear
5. The steering mechanism
6. Brake system
7. An onboard electric equipment
8. A body
9. Electric equipment schemes
 




9975039f


2-10-9-provorachivanie-kolenvala-do-vmt.html

2.10.9. Проворачивание crankshaftа to ВМТ

Operating procedure
Result a radiator framework in service position.
Remove полиwedge a belt.
Unload a tension element semi wedge a belt.

Fig. 2.475. Fastening of the top part of a protective casing


Remove the top part of a protective casing, having released fixing скобы (fig. 2.475).
Wring out a cover гасителя крутильных fluctuations.

Fig. 2.481. Untwisting гасителя крутильных fluctuations


Turn off гаситель крутильных fluctuations, keeping the central bolt накидным a wrench (fig. 2.481).

Fig. 2.490. Fastening of the bottom and average covers of a gear belt


Unscrew bolts of an average and bottom part of a protective casing of a gear belt and remove both parts (fig. 2.490).

ATTENTION
To scroll the engine it is authorised only for crankshaft in a rotation direction (clockwise).

Put crankshaft in position ВМТ.

Fig. 2.492. Fixing of a gear wheel of a gear belt


Fix a gear wheel of a gear belt crankshaftа by means of a stopper crankshaftа for engines with a round gear wheel of a gear belt crankshaftа or by means of a stopper crankshaftа for engines with an oval gear wheel of a gear belt crankshaftа (fig. 2.492).
Marks in an asterisk of a gear belt and stopper should be the friend opposite to the friend. Thus the stopper pin should enter into an aperture of a sealing flange.

THE NOTE
The stopper can be pulled over an asterisk only from the face party шлицев.

Assemblage is carried out in return sequence.
Establish гаситель крутильных fluctuations.
Establish полиwedge a belt.
Establish a framework of a radiator with hinged elements.
Lower an emphasis of a forward support at the expense of a body weight on the rubber buffer and tighten nuts.
Establish an overlay of a forward bumper.

The inhaling moments
Cover of a gear belt to the block of cylinders: 10 Нм*.
Emphasis of a forward support to a radiator framework: 28 Нм.
* Bolts to insert, preliminary having greased with their carving varnish.


2.10.8. Updating of phases timing

2.10.10. Sealing flanges and a two-mass flywheel / a flywheel