Audi A4 with 2001- 2005 of release.
1. Operation and car maintenance service
2. The engine
2.1. The general data
2.2. Predvaritlnye checks
2.3. A Mehanichsky part (petrol engines 2,0л)
2.4. Greasing system
2.5. Cooling system
2.6. Injection system
2.7. System of release of the fulfilled gases
2.8. A mechanical part (petrol engines 3,0; 3,2)
2.9. A mechanical part (petrol engines 4,2)
2.10. A mechanical part (diesel engines 2,0)
2.10.1. Engine number
2.10.2. Candles накаливания
2.10.3. Removal and installation semi wedge a belt
2.10.4. Removal and installation of a tension element semi wedge a belt
2.10.5. Removal and installation гасителя крутильных fluctuations
2.10.6. Removal and installation of an arm of additional units
2.10.7. Removal and installation of a gear belt
2.10.8. Updating of phases timing
2.10.9. Проворачивание crankshaftа to ВМТ
2.10.10. Sealing flanges and a two-mass flywheel / a flywheel
2.10.11. Removal and flywheel installation, cars with multitronic
2.10.12. Shatunno-piston group
2.10.13. Removal and installation of a cover of a head of the block of cylinders
2.10.14. Repair клапанного the mechanism
2.10.15. Removal and installation of cam-shafts
2.10.16. Removal and installation of roller levers
2.10.17. Replacement маслосъемных caps
2.10.18. Check of hydraulic pushers
2.11. Tables
3. Transmission
4. A running gear
5. The steering mechanism
6. Brake system
7. An onboard electric equipment
8. A body
9. Electric equipment schemes
 




9975039f


2-10-14-remont-klapannogo-mekhanizma.html

2.10.14. Repair клапанного the mechanism

Fig. 2.510. Components клапанного the mechanism: 1 – a pipeline arm – 10 Нм; 2 – a bolt 20 Нм; 3 – a balance weight axis; 4 – a bolt of an axis of the balance weight; 5 – a bolt of a head of the block of cylinders; 6 – a washer; 7 – valve checks; 8 – a plate of a spring of the valve; 9 – a valve spring; 10 – маслосъемный a cap; 11 – the directing plug of the valve; 12 – the roller lever; 13 – the roller lever; 14 – sealing rings; 15 – a head of the block of cylinders; 16 – inlet valves; 17 – final valves; 18 – a sealing ring; 19 – an axis; 20 – a bolt 10 Нм; 21 – запорный a bolt 10 Нм; 22 – an axis; 23 – the bearing loose leaf; 24 – a final cam-shaft; 25 – an inlet cam-shaft; 26 – a frame of support



Check of axial displacement of cam-shafts

Fig. 2.511. Check of axial displacement of cam-shafts



Measurement spend at the removed roller levers and the mounted module of support.
The limiting admission of 0,15 mm.


2.10.13. Removal and installation of a cover of a head of the block of cylinders

2.10.15. Removal and installation of cam-shafts