2-10-5-snyatie-i-ustanovka-gasitelya-krutilnykh-kolebanijj.html
2.10.5. Removal and installation гасителя крутильных fluctuationsRemoval
Result a radiator framework in service position.
Remove an engine casing.
Remove полиwedge a belt.
Wring out a cover гасителя крутильных fluctuations.
|
|
Fig. 2.481. Untwisting гасителя крутильных fluctuations
|
Turn off гаситель крутильных fluctuations, keeping the central bolt накидным a wrench ( fig. 2.481).
Installation
Installation is made in return sequence.
Establish гаситель крутильных fluctuations with new original bolts.
|
|
Fig. 2.482. Adjusting position гасителя крутильных fluctuations
|
Installation is possible only in one position: the aperture гасителя крутильных fluctuations should be over a ledge of a gear wheel of a gear belt ( fig. 2.482). Establish полиwedge a belt.
Establish a framework of a radiator with hinged elements.
Lower an emphasis of a forward support at the expense of a body weight on the rubber buffer and tighten nuts.
Establish an overlay of a forward bumper.
The inhaling moments
Гаситель крутильных fluctuations to crankshaftу*: 10 Нм +90 **.
Emphasis of a forward support to a radiator framework: 28 Нм.
Shlangovye collars, width of 9 mm: 3 Нм.
Shlangovye collars, width of 13 mm: 5,5 Нм.
* Replace bolts.
** 90 correspond to one quarter of a complete revolution.
| 