Audi A4 with 2001- 2005 of release.
1. Operation and car maintenance service
2. The engine
2.1. The general data
2.2. Predvaritlnye checks
2.3. A Mehanichsky part (petrol engines 2,0л)
2.4. Greasing system
2.5. Cooling system
2.6. Injection system
2.7. System of release of the fulfilled gases
2.8. A mechanical part (petrol engines 3,0; 3,2)
2.9. A mechanical part (petrol engines 4,2)
2.10. A mechanical part (diesel engines 2,0)
2.10.1. Engine number
2.10.2. Candles накаливания
2.10.3. Removal and installation semi wedge a belt
2.10.4. Removal and installation of a tension element semi wedge a belt
2.10.5. Removal and installation гасителя крутильных fluctuations
2.10.6. Removal and installation of an arm of additional units
2.10.7. Removal and installation of a gear belt
2.10.8. Updating of phases timing
2.10.9. Проворачивание crankshaftа to ВМТ
2.10.10. Sealing flanges and a two-mass flywheel / a flywheel
2.10.11. Removal and flywheel installation, cars with multitronic
2.10.12. Shatunno-piston group
2.10.13. Removal and installation of a cover of a head of the block of cylinders
2.10.14. Repair клапанного the mechanism
2.10.15. Removal and installation of cam-shafts
2.10.16. Removal and installation of roller levers
2.10.17. Replacement маслосъемных caps
2.10.18. Check of hydraulic pushers
2.11. Tables
3. Transmission
4. A running gear
5. The steering mechanism
6. Brake system
7. An onboard electric equipment
8. A body
9. Electric equipment schemes
 




9975039f

2-10-16-snyatie-i-ustanovka-rolikovykh-rychagov.html

2.10.16. Removal and installation of roller levers

Removal
For return installation mark a parity of roller levers and axes of roller levers.

Fig. 2.526. Extraction of an axis of the roller lever


Axis of the roller lever 1 on the admission party take by means of a stripper from a head of the block of cylinders (fig. 2.526).
Remove roller levers.
Unscrew bolts 4 and 5.
Take an axis of the roller lever 3 on the party of release from ГБЦ.

Installation
Installation is made in return sequence, taking into account the following.

THE NOTE
Replace sealing rings of round section 2.
Before installation oil points of support of roller levers.

The inhaling moments
Axis of the roller lever to ГБЦ: 10 Нм.
Carving stopper of an axis of the roller lever to ГБЦ*: 10 Нм.
* Bolts to insert, preliminary having greased with their carving varnish; a carving varnish.


2.10.15. Removal and installation of cam-shafts

2.10.17. Replacement маслосъемных caps