Audi A4 with 2001- 2005 of release.
1. Operation and car maintenance service
2. The engine
3. Transmission
4. A running gear
5. The steering mechanism
6. Brake system
6.1. Preliminary checks
6.2. Repair of brake system
6.3. Repair of brakes of forward wheels
6.3.1. Removal and installation brake pads
6.3.2. A brake of forward wheels FN3
6.3.3. Removal and installation brake pads
6.3.4. A ceramic brake of forward wheels CSIC
6.3.5. Removal and installation brake pads
6.3.6. Removal and installation brake pads (a brake of back wheels C38)
6.3.7. A brake of back wheels RS4 (TYPE 8EC) / C43
6.3.8. Removal and installation of cables of a lay brake, cars from a forward drive
6.3.9. Removal and installation of cables of a lay brake (cars with a full drive)
6.3.10. Removal and installation of the lever of a manual brake
6.3.11. Removal and installation of a basic pillow for a brake pedal
6.4. System ABS
6.5. Tables
7. An onboard electric equipment
8. A body
9. Electric equipment schemes
 







6-3-remont-tormozov-perednikh-koles.html

6.3. Repair of brakes of forward wheels





Fig. 6.28. Components of a forward brake: 1 – a cover of a brake disk; 2 – фланцевый a bolt, 10 Нм; 3 – a brake hose; 4 – spring bracket; 5 – the brake pipeline, 15 Нм; 6 – самоконтрящийся a bolt, 30 Нм; 7 – a bolt, 190 Нм; 8 – the skoba-holder with directing fingers and a protective cap; 9 – a brake disk; 10 – wheel bolts; 11 – screw TORX; 12 – the heat-shielding screen; 13 – the case of a brake support; 14 – the holder; 15 – a bolt with шестигранной a head, 10 Нм; 16 – brake pads; 17 – штекерное connection; 18 – the holder



THE NOTE
After replacement brake pads some times strongly press a brake pedal. It is necessary that brake pads have occupied the working position.
For откачки a brake liquid from a broad tank use capacity for pumping out which adjoins only to a brake liquid. The brake liquid is poisonous substance, therefore it in no event cannot be pumped out a mouth through a hose.
At replacement of components of brake system (a brake disk, a brake support or brake колодка) necessarily pay attention to correctness of identification. Correct identification as the car is an initial condition for correct work of system ESP.



6.2.4. The electric vacuum pump

6.3.1. Removal and installation brake pads