3-3-9-regulirovka-trosa-selektora-akpp.html
3.3.9. Adjustment of a cable of selector AKPPRemove the panel of a drive of inclusion of transfers.
|
THE NOTE
There are differences between cars with drives of inclusion of transfers PRND (about modelling year 2004) and cars with drives of inclusion of transfers PRNDS (since modelling year 2005).
On cars with drives of inclusion of transfers PRND (about modelling year 2004) selector AKPP cable is regulated in selector "D" position.
On cars with drives of inclusion of transfers PRNDS (since modelling year 2005) selector AKPP cable is regulated in selector "S" position.
|
Cars with drives of inclusion of transfers PRND
Translate selector AKPP in position D.
|
|
Fig. 3.104. Easing of a back tightening bolt of a cable of selector AKPP
|
Through an aperture in a gear change drive loosen the back tightening a bolt of a cable of selector AKPP a wrench approximately on one turn ( fig. 3.104).
|
THE NOTE
Tightening a bolt loosen the only on one turn – do not turn on.
Tightening the bolt is accessible only in selector "D" position.
At the weakened tightening bolt selector AKPP should remain in position D.
|
Cautiously slightly move the selector forward-back, thus do not switch it in any position, thanks to it the selector cable is weakened.
Check up accuracy of adjustment of selector AKPP in position D, for this purpose press the selector in a direction of a place of the driver (arrow A).
|
THE NOTE
Any more do not switch selector AKPP during adjustment carrying out.
In this position, without moving the selector, wrap tightening a bolt a wrench.
|
Cars with drives of inclusion of transfers PRNDS
Translate selector AKPP in position S.
Through an aperture in a gear change drive loosen the back tightening a bolt of a cable of selector AKPP a wrench approximately on one turn ( fig. 3.104).
|
THE NOTE
Tightening a bolt loosen the only on one turn – do not turn on.
Tightening the bolt is accessible only in selector "S" position.
At the weakened tightening bolt selector AKPP should to remain necessarily in position S since otherwise correct adjustment is impossible.
|
Cautiously slightly move the selector forward-back, thus without switching it in any other position.
Once again translate the selector against the stop back in position S and release it.
|
THE NOTE
Any more do not switch selector AKPP during adjustment carrying out.
In this position, without moving the selector, wrap tightening a bolt a wrench.
|
Cars with drives of inclusion of transfers PRND and PRNDS
Establish the panel of a drive of inclusion of transfers.
Check up a drive of inclusion of transfers.
The inhaling moments
Tightening a bolt to selector AKPP cable: 13 Нм.
| 