Audi A4 with 2001- 2005 of release.
1. Operation and car maintenance service
2. The engine
3. Transmission
3.1. Coupling
3.2. A mechanical transmission
3.3. An automatic transmission
3.3.1. Marks КП
3.3.2. Refuelling volumes
3.3.3. Check of level of oil ATF and its pouring
3.3.4. The general instructions for repair carrying out
3.3.5. Electronic elements АКПП and places of their installation
3.3.6. Check of a drive of inclusion of transfers
3.3.7. Removal and installation of a drive of inclusion of transfers
3.3.8. Removal and installation of the handle of selector AKPP
3.3.9. Adjustment of a cable of selector AKPP
3.3.10. Removal and installation блокиратора
3.3.11. Adjustment блокиратора
3.4. The privodnoj mechanism
3.5. Tables
4. A running gear
5. The steering mechanism
6. Brake system
7. An onboard electric equipment
8. A body
9. Electric equipment schemes
 




9975039f

3-3-6-proverka-privoda-vklyucheniya-peredach.html

3.3.6. Check of a drive of inclusion of transfers

Check of functioning of a drive of inclusion of transfers
In selector AKPP "S" positions, D, R and Tiptronic the starter should not join.
On speeds above 5 km/h and at selector AKPP switching in position N the electromagnet of blocking of the selector should not work and block the selector. Selector AKPP can be switched.
On speeds below 2 km/h (almost motionless condition) and at selector AKPP switching in position N the electromagnet of blocking of selector AKPP should work only approximately through 1 with. Selector AKPP from position N can be switched only at the pressed pedal of a brake.

Selector AKPP in position P and ignition is included
Do not press a brake pedal.
Selector AKPP is blocked and cannot be switched from position P even at the pressed button of blocking of the selector. The electromagnet of blocking of selector AKPP blocks the selector.
Press a pedal of a brake and keep it.
The electromagnet of blocking of selector AKPP will unblock the selector. Transfer inclusion should be possible at the pressed blocking button on the handle of selector AKPP without "jamming".
Slowly switch selector AKPP from position P through positions R, N, D, S; thus supervise, that indications of the indicator of position of selector AKPP in a combination of devices coincided with actual positions of the selector.

Selector AKPP in position N and ignition is included
Do not press a brake pedal.
On boxes approximately till 08.01 of release: selector AKPP is blocked also it it is impossible to switch from position N, without pressing thus blocking button on the selector handle. The electromagnet of blocking of selector AKPP blocks the selector.
On boxes approximately since 08.01 of release: at smooth switching through position N (for example, from position R in position D) selector AKPP is blocked not at once. It allows to "shake" the car, for example, at slipping. If selector AKPP at not pressed pedal of a brake is more than approximately 1 with is in position N selector blocking works.
Press a brake pedal.
The electromagnet of blocking of selector AKPP will unblock the selector. Transfer inclusion should be possible at the pressed blocking button on the handle of selector AKPP without "jamming".

Selector AKPP in position D, ignition is included
Translate selector AKPP in a groove Tiptronic.
Symbol illumination D on the panel of a drive of inclusion of transfers should go out and symbols + should be highlighted and –.
The indicator of position of selector AKPP in a combination of devices at selector AKPP switching in a groove Tiptroniс should change the indication with PRND on 654321 or (from identification number of the car 8E_5400001) with PRNDS on 7654321.
If preset values are not received, adjust selector AKPP cable.
Check up ignition key blocking.

Check of blocking of the ignition key
Turn the ignition key in position (ignition is included).
Press a pedal of a brake and keep it.
Switching of selector AKPP from position P should pass without "jamming" at the pressed blocking button on selector AKPP handle.
Switch off ignition.
The ignition key should not be taken out in any position of the lever of the selector, except position P.
Translate selector AKPP in position P.
The ignition key "freely" turns in position in which it can be pulled out.
Take out the ignition key.
The ignition key should be taken out only at selector AKPP finding in position P.
Selector AKPP at the clamped blocking button and the pressed pedal of a brake cannot be switched from position P.

Check of the blocking button on selector AKPP handle
Pressing the blocking button should pass without application of special efforts.
After release the blocking button it should return to a starting position independently.
If preset values are not received, check up correctness of installation of the handle of selector AKPP.
Check up on a curvature draught of switching or selector AKPP.

Functioning check
Include ignition.
The blocking button on selector AKPP handle should be pressed for following switchings or if it is not pressed, selector AKPP cannot be switched in the set position.
From position P translate the lever in position R and in addition press a brake pedal.
From position D pass in position S.
From position N be switched in position R; during parking, after some time interval, it is necessary to press a brake pedal in addition.
From position R translate in position P.
If preset values are not received, check up correctness of installation of the handle of selector AKPP.
Adjust selector AKPP cable.


3.3.5. Electronic elements АКПП and places of their installation

3.3.7. Removal and installation of a drive of inclusion of transfers