Audi A4 with 2001- 2005 of release.
1. Operation and car maintenance service
2. The engine
3. Transmission
4. A running gear
4.1. Wheels and tyres
4.2. The general data on a car running gear
4.3. Repair of a suspension bracket of forward wheels
4.3.1. General provisions
4.3.2. Loading of a support of a wheel in own weight of the car
4.3.3. Removal and installation of an amortisation rack
4.3.4. Repair of an amortisation rack
4.3.5. Removal of a screw spring
4.3.6. Installation of a screw spring
4.3.7. Removal and case installation Hubs the bearing
4.3.8. Repair of a rotary fist with the established bearing of a nave
4.3.9. Removal and installation of the top lever
4.3.10. Replacement of forward and back support of the top levers
4.3.11. Removal and stretcher installation
4.3.12. Replacement of support of a stretcher
4.3.13. Removal and installation of persistent wedges резинометаллических support
4.3.14. Removal and stabilizer installation
4.4. A back suspension bracket
4.5. Tables
5. The steering mechanism
6. Brake system
7. An onboard electric equipment
8. A body
9. Electric equipment schemes
 







4-3-9-snyatie-i-ustanovka-verkhnego-rychaga.html

4.3.9. Removal and installation of the top lever

Removal
Remove an amortisation rack

Fig. 4.79. Removal of the top lever


Turn off nuts 1 and remove screws 2 (fig. 4.79).
Take levers 3 and 4.

Installation
Fix the top levers 3 and 4 new screws 2 and new nuts 1 so that position of levers could be changed.

The top forward lever of a suspension bracket
Will expose height a.

Fig. 4.80. The top back lever of a suspension bracket


A = 81 mm 2 mm (fig. 4.80).

Continuation of the top forward and back lever of a suspension bracket
Will expose height a.

Fig. 4.81. Continuation of the top forward and back lever of a suspension bracket


A = 70 mm 2 mm (fig. 4.81).
Twirl nuts 1 (fig. 4.79).
Check up position of the top levers.
If necessary to repeat exhibiting operations
Establish a basic arm.


4.3.8. Repair of a rotary fist with the established bearing of a nave

4.3.10. Replacement of forward and back support of the top levers