Audi A4 with 2001- 2005 of release.
	1. Operation and car maintenance service
	2. The engine
	3. Transmission
	4. A running gear
	5. The steering mechanism
	6. Brake system
		6.1. Preliminary checks
		6.2. Repair of brake system
		6.3. Repair of brakes of forward wheels
		6.4. System ABS
			6.4.1. Instructions on carrying out of repair work with antiblocking system
			6.4.2. Antiblocking system (ABS) Bosch 5.7
			6.4.3. Removal and installation of the hydraulic block of management
			6.4.4. Replacement of the block of management ABS
			6.4.5. Removal and installation of the hydraulic block
			6.4.6. Removal and installation of components of system ABS on a forward axis
			6.4.7. Removal and installation of the gauge of frequency of rotation on a back axis
			6.4.8. Removal and rotor installation on a back axis
			6.4.9. Removal and rotor installation on a back axis
			6.4.10. Removal and installation of the switch of stoplights
			6.4.11. Removal and installation of the gauge of cross-section accelerations and the gauge of rotation round a vertical axis
			6.4.12. Removal and installation of the gauge of pressure in brake system
		6.5. Tables
	7. An onboard electric equipment
	8. A body
	9. Electric equipment schemes

6-4-12-snyatie-i-ustanovka-datchika-davleniya-v-tormoznojj-sisteme.html

6.4.12. Removal and installation of the gauge of pressure in brake system

THE NOTE

Protect a motor compartment from a following brake liquid.

Removal

Fig. 6.71. Removal of a tank from a cooling liquid

Unscrew the fixing screw 1 and take capacity forward in an arrow direction, a broad tank of a cooling liquid to remove aside (fig. 6.71).

The inhaling moment: 6 Нм.

Fig. 6.94. Gauge sockets

Disconnect sockets 1 (fig. 6.94).

Unscrew the gauge of pressure of brake system.

Installation

The further installation is carried out in return sequence.

Pump over brake system.

Spend trial run ESP.