1.3.9. Screen wipers

The screen wiper handle the screen wiper, and also an automatic mode of a screen wiper and ??????????????? joins.

Fig. 1.89. The handle of management of a screen wiper

For short inclusion of a screen wiper wring out the handle downwards in position 1 (fig. 1.89).

Take away the handle upwards in the fixed position.

Displacement of a regulator And upwards or downwards duration of intervals of faltering inclusion of a screen wiper changes.

On cars with a sensor control of a rain sensitivity of a sensor control of a rain can be changed displacement of a regulator And upwards or downwards.

Take away the handle upwards in the fixed position 3.

Take away the handle upwards in the fixed position 4.

Delay the handle in position 5.

Release the handle. Стеклоомыватель it is switched off, and brushes work still approximately 4 with.

Establish the handle in a starting position 0.

The system of screen wipers and стеклоомывателей works only at the included ignition.

The rain sensor control works only in position of a faltering mode of a screen wiper. In case of a rain the faltering mode of a screen wiper joins automatically.

Sensitivity of a sensor control of a rain decreases displacement of a regulator And downwards. For increase in sensitivity of a sensor control of a rain the regulator should be displaced upwards. The sensitivity is above established, the before a screen wiper brush react to a moisture on a windscreen. Duration of intervals of a faltering mode along with the established sensitivity depends also on speed of the car.

At time stops, for example, on traffic lights, speed of work of brushes of a screen wiper automatically decreases. On cars with a rain sensor control the faltering mode of a screen wiper automatically joins. Jets ??????????????? are warmed at the included ignition.

Duration of intervals of a faltering mode depends also on speed of the car.

For windscreen cleaning at included light it is necessary only quickly pull the screen wiper handle. Otherwise at longer procrastination of the handle the device of cleaning of headlights that will lead to vain use of a washing liquid in a refuelling tank ??????????????? will join also.

ATTENTION Reliable work of brushes of a screen wiper is obligatory for maintenance of good visibility and traffic safety. The rain sensor control carries out finally auxiliary function and does not release the driver from a duty to include a manual mode of a screen wiper according to visibility conditions.

In a frost, before the first inclusion of a screen wiper check up, whether brushes have frozen. Otherwise it is possible to damage not only brushes, but also the screen wiper electric motor

In order to avoid inadvertent inclusion of a screen wiper and by that its damages switch off beforehand a screen wiper in washing installation (establish the screen wiper handle in position 0).

THE NOTE If at the switched off ignition the screen wiper handle is in position of a faltering mode, the rain sensor control joins only at speed of the car more than 6 km/h.

The worn out or polluted brushes of a screen wiper lead to formation свилей. Infringement of function of a sensor control of a rain is As a result possible. Regularly supervise brushes of a screen wiper of the car.

At included light delay the handle in position 5 (teamwork of a screen wiper and ??????????????? in an automatic mode) and keep the handle in the given position more than 1 with (fig. 1.89).

Fig. 1.90. Working position of a washing jet of a headlight

For cleaning jets of washers of headlights under the pressure of water are put forward outside (fig. 1.90).

Regularly, for example at refuelling, delete from glasses of headlights a dirt not giving in to washing off (traces from insects).

For preservation of working capacity of system in winter conditions clear nests of washing jets of snow, and also delete therefrom ice, using for this purpose aerosol оттаивателем.

Reliable work of brushes of a screen wiper is obligatory for good visibility.

Take away the lever of a screen wiper from glass.

Displace a brush stopper in a direction of an arrow And (fig. 1.91). Thus strong keep a brush.

Fig. 1.91. Replacement of brushes of a screen wiper

Pull a brush In from a nest of the lever of a screen wiper.

Displace back a stopper of a new brush. Thus the brush nest is visible.

Establish a new brush in a nest of the lever of a screen wiper With.

Displace a brush stopper in a direction of arrow D. Click of fixing of a stopper on the screen wiper lever Should be audible.

Establish the screen wiper lever in a starting position that it adjoined to glass.

ATTENTION At the taken away levers of a screen wiper of a windscreen it is not authorised to include ignition. Otherwise there will be an installation of brushes in lay position and thus brushes will damage a paint and varnish covering of a cowl.

Regularly clean brushes means for cleaning of glasses to avoid formation свилей (defects of glass). At strong pollution, for example, the rests of insects, it is recommended to clean brushes a sponge or a fabric.

For the safety reasons change brushes of one-two time in a year.