1.3.2. Control lamps of a combination of devices

Fig. 1.40. Control lamps of a combination of devices

Control lamps signal about a condition of certain functions/malfunctions.

On some cars the symbol of lay fires is on the switch / light switch.

THE NOTE A number of functions is supervised by the monitoring system of malfunctions. Functional infringements are deduced on the display of a combination of devices as red symbols (a priority 1 – danger) or yellow symbols (a priority 2 – the prevention).

The control lamp signals about malfunction in the monitoring system of the fulfilled gases. As soon as possible address on the specialised enterprise and eliminate a cause of defect.

The control lamp watches work of system of pillows and натяжителей tapes of seat belts.

The control lamp lights up for some seconds at ignition inclusion.

The system is faulty, if the control lamp does not die away after inclusion of ignition or lights up, blinks/flickers during movement, and also does not light up at ignition inclusion.

ATTENTION In case of malfunction of system check up it at the specialised enterprise. Otherwise there is a danger that at failure there will be no regular operation of system of pillows or натяжителей tapes of seat belts.

The control lamp in a combination of devices burns at work of system of regulation of speed.

At movement with the trailer the control lamp blinks together with the included indexes of turn.

The control lamp blinks at inclusion of indexes of turn, only if the trailer is correctly connected to the car.

At malfunction of a lantern of the index of turn on the car or the trailer the control lamp does not blink.

Control lamp of function ABS and devices of electronic blocking of differential (EDS).

The control lamp lights up for some seconds at inclusion of ignition/in time of start-up of the engine and should go out after the termination of automatic process of the control.

Device ABS is faulty, if:

– The control lamp does not light up at ignition inclusion;

– The control lamp does not die away after some seconds;

– The control lamp lights up on the move.

In this case car braking only with use of usual brake system, i.e. without ABS is possible. As soon as possible address on the specialised enterprise. At malfunction ABS control lamp ESP burns.

If control lamp ABS burns together with a control lamp of brake system (at the released manual brake) refusal not only regulating function ABS, but also malfunction of brake system in this case takes place.

In case of functional infringement of brake system on the display of a combination of devices there is a symbol.

Device EDS works together with ABS. About device EDS refusal fire of control lamp ABS signals. As soon as possible address on the specialised enterprise.

ATTENTION At fire of a control lamp of brake system together with control lamp ABS at once stop and check up level of a brake liquid in a refuelling tank. At falling of level of a brake liquid below a mark MIN the further movement is not authorised. At normal level of a brake liquid the reason can consist in malfunction ABS. With failure of regulating function ABS at braking rather fast blocking of back wheels can take place. Under certain circumstances it can lead to drift of the back bridge of the car.

The control lamp lights up after inclusion of ignition and burns until the seat belt of the driver / the forward passenger will be fastened. Beginning from speed of the car about 10 km/h in addition the warning signal (зумм) sounds.

The control lamp blinks together with the included indexes of turn.

Depending on the included indexes of turn the left or right control lamp blinks. At the included emergency light alarm system both control lamps of indexes of turn blink simultaneously.

At refusal of one of turn indexes the control lamp blinks twice more often.

This case does not concern movement with the trailer. At malfunction of any lantern of the index of turn on the car or the trailer the control lamp does not blink.

The control lamp watches function of electronic system of dynamic stabilisation.

The lamp blinks during movement at device ESP work.

The lamp lights up for the function control at inclusion of ignition and should go out approximately through 2 with.

The lamp burns at malfunction ESP.

The lamp burns after switching-off and последущего accumulator connections.

The lamp burns at switched off device ESP.

The lamp burns also at refusal ABS as device ESP works together with ABS.

At fire of a control lamp right after engine start-up there can be protective switching-off ESP caused by system. In this case you можнно to include ESP deenergizing and the subsequent inclusion of ignition. When the control lamp will go out, the device is completely ready for operation.

In case of switching-off and the subsequent connection of the accumulator the control lamp lights up after ignition inclusion. That the lamp has gone out, enough short movement on a straight line.

The control lamp signals about defect of the generator or malfunction of an electric equipment of the car.

The control lamp lights up at inclusion of ignition and should go out after engine start-up.

If the lamp lights up during car movement, as a rule, still it is possible to reach to the nearest specialised enterprise. As thus, however, there is a continuous category of the accumulator, it is necessary to switch off all consumers of a current, except the most necessary.

ATTENTION Fire in a combination of devices during movement of in addition alarm symbol of malfunction of system of cooling testifies to malfunction of the water pump of system of cooling. Immediately stop and muffle the engine.

The control lamp burns at the included headlight.

The control lamp lights up at inclusion of a headlight or at using a faltering light signal.

The control lamp burns at included lay fires.

The control lamp watches a control system of the petrol engine.

The control lamp (Electronic Power Control) lights up at inclusion of ignition for the control of function of system.

THE NOTE Fire of a control lamp during movement testifies to malfunction in a control system of the engine. Urgently address on the specialised enterprise for engine check.

The control lamp burns in the course of a prestarting warming up of the engine.

Fire of a control lamp testifies to a prestarting warming up of the engine. The engine get at once as soon as the lamp will go out. At start-up of the heated-up engine, and also at external temperature above +8 С the control lamp lights up only approximately on 1 with.

THE NOTE The blinking of a control lamp of system of a prestarting warming up during movement testifies to malfunction in a control system of the engine. The engine requires urgent check. The reason of that the control lamp at ignition inclusion does not light up at all, there can be a malfunction in system of a prestarting warming up.

The control lamp blinks at too low level of a brake liquid, malfunction of device ABS or at the tightened manual brake.

In case of a blinking of a control lamp (at the released manual brake) stop and check up level of a brake liquid.

At refusal ABS control lamp ABS lights up together with a control lamp of brake system.

The control lamp burns also at the tightened manual brake. Besides, at movement more than 3 with with a speed above 5 km/h the buzzer sounds and on the display alarm indication is deduced.

ATTENTION If the control lamp of brake system does not die away or lights up on the move it testifies to falling of level of a brake liquid in a refuelling tank. Stop and take advantage of the qualified help.