1-3-11-naruzhnye-zerkala.html
1.3.11. External mirrorsPosition of external mirrors is regulated by the electric drive.
Installation of external mirrors
|
|
Fig. 1.93. The multiitem switch of an external mirror
|
Rotation of the multiitem switch (button) carries out switching on the left external mirror L or the right external mirror R ( fig. 1.93). Button pressing in the directions specified by arrows so adjust a reflective surface of external mirrors that the sufficient back review was provided.
Folding of both mirrors
Turn the button in position And.
To put external mirrors it is recommended, for example, for their preservation at a parking or in narrow spaces.
Heating of mirrors
The reflective surface of external mirrors is warmed at the included heating of back glass depending on external temperature.
Automatics of a deviation of a mirror of the forward passenger in a roadbed direction
At electric drive switching on a mirror of the party of the forward passenger (position R) and inclusion of transfer of a backing the reflective surface of a mirror slightly deviates downwards. Thereby visibility бордюрного a stone is provided at a parking.
The mirror comes back in a starting position after deenergizing of transfer of a backing and car movement forward with a speed more than 15 km/h or at electric drive switching to a mirror of driver L or switching in neutral position 0.
Memory of position of external mirrors
At programming of position of a seat of the driver of cars with a memory of position of a seat of the driver the set position of external mirrors is automatically programmed also.
|
ATTENTION
Convex and асферические mirrors increase review sector. However they reduce the image of objects. Therefore such mirrors only conditionally are suitable for an estimation of distance to moving behind vehicles.
|
At displacement of a mirror as a result of influence of external forces (for example, blow at maneuvering) carry out full electric folding of mirrors. At all do not establish a mirror in a starting position a hand as it can negatively affect their mechanical function.
|
THE NOTE
In default an electric drive undertake edge of a mirror a hand and establish its pressing edge of a reflective surface.
|
Automatically shielded external mirrors
External mirrors are shielded automatically together with an internal mirror. At the included ignition there is automatic a shielding of light of mirrors depending on a stream of light falling on them (for example, light of headlights behind).
At inclusion of illumination of salon or transfer of a backing of a mirror come back in a starting position (without light shielding).
|
THE NOTE
In case of function of shielding of an internal rear-view mirror function of automatic shielding of external mirrors is disconnected also.
Trouble-free function of automatic shielding of a mirror is possible only at the cleaned sun-protection curtain of back glass and when with a stream of light falling on an internal mirror interferes nothing.
|
| 