Audi A4 with 2001- 2005 of release.
1. Operation and car maintenance service
2. The engine
3. Transmission
3.1. Coupling
3.1.1. Check of functioning of the main thing and the worker of cylinders of coupling
3.1.2. Removal of air from coupling knot
3.1.3. Removal and gauge installation on a coupling pedal
3.1.4. Removal and installation сервопружины
3.1.5. The main cylinder of coupling
3.1.6. Removal and pipeline installation on the main thing / the worker coupling cylinders
3.1.7. Instructions on removal and installation main / the worker of cylinders of coupling
3.1.8. Removal and installation of the main cylinder
3.1.9. The mechanism of deenergizing of coupling
3.1.10. Removal and installation of the working cylinder
3.2. A mechanical transmission
3.3. An automatic transmission
3.4. The privodnoj mechanism
3.5. Tables
4. A running gear
5. The steering mechanism
6. Brake system
7. An onboard electric equipment
8. A body
9. Electric equipment schemes
 




9975039f


3-1-3-snyatie-i-ustanovka-datchika-na-pedali-scepleniya.html

3.1.3. Removal and gauge installation on a coupling pedal

Fig. 3.4. Pedal knot of cars with the left wheel: 1 – a basic pillow; 2 – a basic finger of pedals of coupling and a brake; 3 – a safety lock; 4 – the screw with internal шестигранником, 25 Нм; 5 – a brake pedal; 6 – the gauge of position of a pedal of coupling; 7 – the screw with internal шестигранником, 5 Нм; 8 – a coupling pedal; 9 – a safety lock; 10 – capture; 11 – the screw with internal шестигранником, 20 Нм; 12 – the main cylinder; 13 – сервопружина; 14 – the gauge on a pedal of coupling for engine start; 15 – bolt Torx, 25 Нм



THE NOTE
To guarantee sufficient reliability of landing, the gauge of a pedal of coupling is authorised to be established only once.

Dismantle
Remove a ware box from outside the driver.

Fig. 3.5. A shtekernyj socket and the gauge of a pedal of coupling


Disconnect штекерный a socket 1 on the gauge of a pedal of coupling (fig. 3.5).
Unblock the gauge of a pedal of coupling by 2 turn to the left on 45 and take from the directing.

Installation

Fig. 3.6. Pusher extraction


Before installation of the gauge of a pedal of coupling completely take a pusher (fig. 3.6).
The coupling pedal should остваться in non-working position (is not pressed).

Fig. 3.7. Installation of the gauge of a pedal of coupling


The gauge of a pedal of coupling conduct through an assembly aperture, влавливая a pusher in a pedal of coupling and fix the gauge turn to the right on 45 (fig. 3.7).
Connect the electric tip of the gauge of a pedal of coupling.
Establish a ware box from outside the driver


3.1.2. Removal of air from coupling knot

3.1.4. Removal and installation сервопружины