Audi A4 with 2001- 2005 of release.
1. Operation and car maintenance service
2. The engine
3. Transmission
4. A running gear
5. The steering mechanism
6. Brake system
7. An onboard electric equipment
8. A body
8.1. Hinged elements of a body
8.2. Doors, locks of doors and the roof hatch
8.2.1. Removal and installation of a framework of glass and стеклоподъемника a forward door
8.2.2. Removal and electric motor installation стеклоподъемника
8.2.3. Adjustment of a forward door
8.2.4. Removal of the handle of a door
8.2.5. Removal of the lock of a door
8.2.6. Repair of the central lock
8.2.7. Removal and installation of a framework of glass and стеклоподъемника a back door
8.2.8. Adjustment of a back door
8.2.9. Removal and installation of a wind-shelter guard of the hatch of a roof
8.2.10. Removal and installation sun-protection шторки
8.2.11. Removal and overlay installation
8.2.12. Cover adjustment podemno-sdvizhnogo the hatch
8.2.13. Replacement of a sealant of the panel of the hatch
8.2.14. Clearing of drainage hoses
8.3. Osteklenie bodies
9. Electric equipment schemes
 







8-2-7-snyatie-i-ustanovka-ramki-stekla-i-steklopodemnika-zadnejj-dveri.html

8.2.7. Removal and installation of a framework of glass and стеклоподъемника a back door

Removal
Remove a door upholstery.
Remove the electric motor стеклоподъемника manual стеклоподъемник.
Disconnect штекерные sockets.

Fig. 8.66. The framework has flown down and стеклоподъемник: 1 – the framework has flown down


Turn away bolts 7 and 8 (fig. 8.66).
Turn away bolts 3, 4, 6 and 10 and to take a framework of glass with стеклоподъемником from a door upwards (fig. 8.66).

Installation
Insert a framework and стеклоподъемник into a door from above.
Insert the top half of profile of consolidation on a door into a glass framework.
Slightly wrap fixing screws 4 ahead and behind.
In summary slightly wrap bolts in sequence 3, 10, 8 (fig. 8.66).
Screw by hand adjusting bolts with a fillet 4 (fig. 8.66).
Slightly press the top part of a framework of glass 1 in a direction inside.
Tighten bolts 3 and 10 moment 32 Нм (fig. 8.66).
Tighten adjusting bolts with a fillet 4 moment 32 Нм.
Tighten a bolt 8 moment 10 Нм.
Tighten fixing screw (arrow) in a framework has flown down the moment 32 Нм.
Insert the bottom half of sealant of a door into an internal wall of a door.
Fix a holder стеклоподъемника a bolt 7 on an internal wall of a door.
Press carving pins of a drum стеклоподъемника until they will not be fixed in an internal wall of a door.

Removal and electric motor installation стеклоподъемника

Fig. 8.58. The electric motor стеклоподъемника a forward door


For removal turn away bolts 2 and remove the electric motor стеклоподъемника (fig. 8.58).
Electric motor installation стеклоподъемника is carried out in return sequence.

Removal and installation manual стеклоподъемника

Fig. 8.67. Manual стеклоподъемник


Turn away bolts 2 and remove manual стеклоподъемник from the interior of a door wall (fig. 8.67).
Installation manual стеклоподъемника is carried out in return sequence.


8.2.6. Repair of the central lock

8.2.8. Adjustment of a back door