5-1-2-prokachka-sistemy-rulevogo-upravleniya.html
5.1.2. Prorolling of system of a steeringAfter works on steering system its prorolling which can be various depending on amount of executed works is made.
After steering replacement in gathering or after amplifier replacement
Check up level of oil of hydraulic system and if necessary add.
Raise the car so that forward wheels were released.
For short time start the engine (макс. 2 with.)
Air should not get to the pump, therefore it a steering wheel do not twist.
Intervals between engine starts nearby 30 with.
Check up level of oil of hydraulic system and if necessary add.
Repeat operations while oil level is not stabilised.
At the switched off engine of 10 times turn a steering wheel from an emphasis against the stop.
Check up level of oil of hydraulic system and if necessary add.
Air which has remained in system will leave during car movement approximately through 10–20 km independently.
At replacement of an element of a steering, except the amplifier (the pump, hoses, etc.)
Check up level of oil of hydraulic system and if necessary add.
For short time start the engine (макс. 2 with.)
Air should not get to the pump, therefore it a steering wheel do not twist.
Intervals between engine starts nearby 30 with.
Check up level of oil of hydraulic system and if necessary add.
Repeat operations while oil level is not stabilised.
Start the engine and leave to work 2–3 minutes, a steering wheel do not twist.
Air which has remained in system will leave during car movement approximately through 10–20 km independently.
| 