1.5.7. Management of the menu of an independent heater

Button "RESET" and the switch of functions of the handle of a screen wiper it is possible to cause menu indication, to read out the data and to carry out adjustment.

Fig. 1.138. Controls

Press button "RESET" In so often, there will be no yet a menu indication (fig. 1.138).

For management of menu indication press the switch of functions of A.Perekljuchenie (forward/back) it is carried out similarly indications.

Press button "RESET".

Pressing of the switch of functions makes sample of indication of the menu/is possible change of parametres of adjustment. The chosen parametres are allocated with a red background.

Button "RESET" pressing the chosen joins the established parametres funktsija/prove to be true. The chosen functions are marked with "tick".

Management of an independent heater/fan is carried out by button "RESET" and the switch of functions located on the handle of a screen wiper.

Programming and management is carried out through modes of adjustment of the display of a combination of devices.

Press button "RESET". There is an initial menu.

Pressing of the switch of functions And

Fig. 1.139. Display FIS of a combination of devices: the menu Einstellen, the line Standheizung is chosen

Include фунцию Einstellen (adjustment) (on a red background) (fig. 1.139).

Press button "RESET". There is a list of the menu with adjustment possibility.

In the same way from the given menu will choose the menu Stand-heizung/-Luftung (an independent heater/fan) (fig. 1.139).

Include actual function by pressing of button "RESET" and if necessary carry out other adjustment

Fig. 1.140. Display FIS of a combination of devices: the menu Heizen/Luften, it is chosen Timer 3

In a mode Incl. Motor (only some updatings of the car) the part of heat of an independent heater in addition is used for engine warming up.

Adjustment of an independent heater/fan is carried out through information system of the driver (FIS).

Will choose the menu Heizen/Liiften (heater/fan).

Pressing of the switch of functions include function Timer 1 2 3.

Press button "RESET" so long, one of timer figures yet will not start to blink.

Pressing of the switch of functions will choose the actual timer.

With button "RESET" pressing confirm sample of the actual timer.

Pressing of the switch of functions establish a line of sample on hh:hh/hh. хх.

Press button "RESET". Hour indication blinks.

Pressing of the switch of functions establish hour indication.

Again press button "RESET". Indication of minutes blinks.

In the same way establish indication of minutes, day and month.

Press button "RESET". Now adjustment of other functions or an exit from the menu through a command Zuruck is possible.

With pressing of the switch of functions mark a line Dauer хх Min (duration хх minutes).

Press button "RESET". Indication of duration of inclusion blinks.

Pressing of the switch of functions establish actual duration (5-minute values in limits from 15 to 60 mines).

Press button "RESET". Now adjustment of other functions or an exit from the menu through a command Zuruck is possible.

After inclusion of an independent heater/fan through the menu Heizung Ein or Liiftung Ein or remote radio management the established parametres of duration of work of the timer 1 are staticized.

The maximum time of preliminary programming of an independent heater/fan makes 30 days. At input of the value exceeding the given figure, an adjustment marker it is established for the greatest possible date.

At installation of already expired date the adjustment marker comes back to the display of today's date. If entered time of hours (timer) already has expired, there is an automatic switching for tomorrow's date.

For inclusion of an independent heater/fan during set time it is necessary preliminary include timer function.

After sample of the timer, installation of time and duration of inclusion include timer function as follows.

With pressing of the switch of functions mark a line Timer 1 2 3.

Short-term pressing of button "RESET" establish a tick.

Now adjustment of other functions or an exit from the menu through a command Zuruck is possible.

The timers resulted in operating conditions are presented on the display of a digital watch in the form of following symbols:

- Independent heater;

- The independent fan.

After timer adjustment both symbols are deduced on the display of the display of hours simultaneously.

At work of an independent heater or the fan the corresponding symbol blinks.

Probably also operative inclusion of an independent heater/fan.

In the menu Heizen/Liiften (a heater / the fan) will choose a line Heizung Ein (operative inclusion of a heater) or Luftung Ein (operative inclusion of the fan).

Button "RESET" pressing establish a tick. The independent heater / the fan thereby joins.

Now adjustment of other functions or an exit from the menu through a command Zuruck is possible.

Duration of work after operative inclusion is defined by the set adjustment of time of the timer 1 (Timer 1).

The independent heater / can be switched off the fan also in a manual mode.

In the menu Heizen/Liiften (heating/ventilation) will choose a line Heizung Ein (operative inclusion of a heater) or Luftung Ein (operative inclusion of the fan).

Button "RESET" pressing to remove a tick. Thereby the independent heater / the fan is switched off.

Now adjustment of other functions or an exit from the menu through a command Zuruck is possible.

Probably also radio-controlled inclusion or deenergizing of an independent heater / of the fan.

Fig. 1.142. Remote radio management of an independent heater / of the fan

Press a key of inclusion 1, the control lamp 2 (fig. 1.142) will not light up yet. Function Heizung Ein (operative inclusion of a heater) or Liiftung Ein (operative inclusion of the fan) Thereby joins.

Press a key of deenergizing 3, the control lamp 2 will not light up yet. Thereby function Heizung Ein (operative inclusion of a heater) or Luftung Ein (operative inclusion of the fan) is switched off.

Fig. 1.141. The display of a digital watch

Displace back and uncover the transmitter (fig. 1.141).

Replace food elements. On food elements there are marks for their correct installation. New elements of a food (1,5) should correspond to the specification of original batteries.

Close a cover.

The operating mode (independent ототтитель or the independent fan) is defined as a result сравнивания the temperature established by corresponding controls of system of heating / of ventilation or the conditioner, with actual temperature in salon.

Duration of work of an independent heater/fan is defined by the set adjustment of time of the timer 1 (Timer 1).

If it is necessary to include again an independent heater/fan after the expiration of time of its work it is necessary to press in the beginning a key of deenergizing 3 and only then a key of inclusion 1.

At switching-off by a key 3 about three seconds the control lamp 2 transmitters burns.