Audi A4 with 2001- 2005 of release.
1. Operation and car maintenance service
2. The engine
3. Transmission
4. A running gear
5. The steering mechanism
6. Brake system
7. An onboard electric equipment
7.1. The general data
7.2. Power supplies system
7.3. The generator
7.4. A starter
7.4.1. Removal and starter installation (cars with 4-tsil. The petrol engine of 1,6 l, турбированным the engine of 1,8 l, MPI 2,0 l and FSI 2,0)
7.4.2. Cars from 6-cylinders petrol engine MPI of 2,4 l and MPI 3,0 l
7.4.3. Cars with 6-cylinder petrol engine FSI of 3,2 l
7.4.4. Cars with 8-cylinder engine MPI of 4,2 l – Audi S4
7.5. Relay blocks, sockets and safety locks
8. A body
9. Electric equipment schemes
 







7-4-1-snyatie-i-ustanovka-startera-avtomobili-s-4-cil-benzinovym.html

7.4.1. Removal and starter installation (cars with 4-tsil. The petrol engine of 1,6 l, турбированным the engine of 1,8 l, MPI 2,0 l and FSI 2,0)

Removal
Disconnect a weight wire in the accumulator at the switched off ignition.
In cars with an independent heater unscrew screws of an exhaust pipe of an independent heater and an additional heater on шумоизоляционном the screen.

Fig. 7.61. Fastening of power supplies of a starter


Release screws or quick disconnect clamps 1 and 2 and remove forward шумоизоляционный the screen (fig. 7.61).
Turn off plug B wire + 2.
Disconnect a socket of the plug 50 1 (fig. 7.61).
There, where is available, remove an insulator on плюсовой to the starter plug.
Turn off a cable collar 4 (fig. 7.61).
Turn off fastening of an arm of a starter on the block of cylinders 3 and on a starter.

Fig. 7.62. Starter fastening


Unscrew screws 1 and 2 (fig. 7.62).
Remove a starter downwards.

Installation
Establish in return sequence.
Connect the accumulator.

The inhaling moments
Starter to a transmission:
– M10: 45 Нм;
– M12: 65 Нм.
Plug B + to a starter: 16 Нм.


7.4. A starter

7.4.2. Cars from 6-cylinders petrol engine MPI of 2,4 l and MPI 3,0 l