1.2.11. The Podemno-sdvizhnaja panel of a roof

Fig. 1.28. The rotary switch podemno-sdvizhnoj roof panels

Management podemno-sdvizhnoj the roof panel is carried out by the rotary switch (fig. 1.28). For otodviganija/zadviganija panels the switch can be established in slightly fixed positions. The switch works only at the included ignition. Panel lifting is possible only at a switch finding in position 0.

To open and close podemno-sdvizhnuju the roof panel it is possible within approximately ten minutes and after ignition deenergizing. However the rotary switch podemno-sdvizhnoj roof panels is disconnected at once after opening of one of forward doors.

Turn the switch in position 1 (fig. 1.28). The switch is aloud fixed. The given position of the panel of a roof is characterised by smaller noise of a wind.

Turn the switch in position 2 and keep it to full отодвигания roof panels.

Turn the switch in a starting position 0.

For full lifting of the panel of a roof press and release the switch at its finding in a starting position.

For panel installation in intermediate position press and keep the switch while the panel will not occupy necessary position.

At отодвигании roof panels the curtain protecting from solar influence automatically opens. At the closed panel of a roof the curtain can be closed also a hand.

The sun-protection curtain is recommended to be closed during car parking on the sun. During parking of the car or on a case of a sudden rain (at the closed sun-protection curtain) do not forget to close the elevating panel of a roof.

For closing of the panel of a roof turn the switch in position 0.

Pull the back party of the switch and keep it until the elevating panel not to fall to necessary position.

Short procrastination of the switch, the roof panel is closed automatically. Repeated short-term procrastination of the switch the panel can be stopped in any position.

ATTENTION Inattentive or uncontrolled closing podemno-sdvizhnoj panels is fraught with emergency consequences Therefore at покидании the car always take out the ignition key from the lock.

From elements of the solar battery a conditioner food in a fan operating mode is carried out.

Management of the roof panel corresponds to the description resulted above.

The internal upholstery is rigidly connected to the panel of a roof with the solar battery and consequently it cannot be shifted separately.

In emergency shifted panel of a roof can be closed by means of the electric drive.

The shifted panel of a roof has protection against overloads. If it does not manage to be closed in a normal mode it can be made by means of function of emergency closing.

Turn the switch in a starting position 0.

Pull and keep the switch so long, the shifted panel of a roof will not be closed yet.

In emergency shifted panel of a roof can be closed mechanically.

Fig. 1.29. Screw-driver Installation sites

Accurately insert the flat party of a screw-driver in 1.29 places shown in drawing.

Hook and separate plafond glass downwards.

Take кривошипную the handle located from the interior of a cover of safety locks.

Fig. 1.30. The krivoshipnaja handle for emergency closing

Insert кривошипную the handle 1 against the stop in internal шестигранник 2, keeping it thus (fig. 1.30).

Rotation кривошипной handles close the roof panel.

After that establish plafond glass into place. At first plastic ledges are inserted into nests, and then glass nestles upwards.

THE NOTE The krivoshipnaja handle of emergency closing rotates easier if to use as the help the screw-driver handle. For this purpose it is necessary to take in the beginning from the handle of a screw-driver a core, and then to put on the handle on кривошипную the handle.